Home Features Measuring Prices Instructions Warranties

Measure the width of the area to be covered ("A").  Round to the nearest even foot increment.  "A" will be the width of the cover.

If mounting to house wall:

Measure the distance from the back wall of building to the outside edge of desired area ("B").  "B" will be the projection of the cover. 

If Attaching to the existing eave:

Measure the distance from the wall to the outside of the eave ("C").  Subtract "C" from "B" (distance form the back wall to outside edge) to arrive at the measurement ("D").  "D" will be the projection of the cover.

(Print this page and enter your measurements below)


"A" = _______ Total width of cover
"B" = _______ Total projection of cover
"C" = _______ Eave overhang
"D" = _______ Total projection from eave
"E" = _______ Maximum height
Live Load: 10 psf (non-snow area)   _____
	   20 psf (light snow area) _____
	   30 psf (heavy snow area) _____
 
Color:	White _____	Ivory _____
	Beige _____	Sand  _____	
 
 
 
 

* Open lattice patio cover post set back 12" from total projection
* Solid patio cover post are even with total projection

All units come with 10' tall post, which can be cut to desired height.
 

[ Home ] [ Features ] [ Measuring ] [ Prices ] [ Instructions ] [ Warranties ]